HP xw8600 - Workstation - Connecting the Graphics Monitor

HP xw8600 Workstation
HD-SDI In (A) from 4:2:2 VTR (or 4:4:4 dual link)
HD-SDI In (B) from 4:4:4 VTR (dual link 0:2:2)
HD-SDI Out (A) to 4:2:2 VTR (or 4:4:4 dual link)
HD-SDI Out (B) to 4:4:4 VTR (dual link 0:2:2)
Ref in from sync gen
HD-SDI (V2) Out 0:2:2/4:4:4
display device on VTR
HD-SDI (V1) Out 4:2:2 or 4:4:4
display device on VTR
To keyboard, mouse,
Monitor calibrator (#)
USB Tablet (*)
To Slave Renderer (#)
To house network (*)
NVIDIA Quadro FX SDI
Connect to second DVI out
on the main FX 5600 card
NVIDIA Quadro FX 5600
To graphics monitor
ATTO 44ES FC
Storage 1,4 to SAN; 2,3 to Stone
To Wire network QUAD GigE
(InfiniBand switch option available)
ATTO 44ES FC opt storage (*)/
QUAD GigE - 0 to Control Surface,
1 to LAN, 3 to SAN (#)
AJA OEM-2K
DVI2 Out to FX5600 SDI
daughter card
Product key:
* Visual Effects and Finishing
# Lustre
NOTE This diagram depicts a Gigabit Ethernet (GigE) adapter located in PCI slot five. Your workstation may also
be configured with an optional QuickSilver InfiniSERV 9000 PCIe-DDR adapter. On the HP xw8600 workstation,
the PCI slots are numbered one to seven from top to bottom.
Connecting the Graphics Monitor
The graphics monitor connects to the Nvidia
®
Quadro
®
FX graphics card. This is also an opportunity to
connect the graphics adapter to its add-on card, the Nvidia Quadro SDI Output adapter.
14 | Chapter 3 Connecting Peripherals