Setting Up Video Hardware
Topics in this chapter:
■
Video Hardware Components on page 21
■
Connecting Video Components on page 22
■
Setting Up VTR Emulation on page 23
Video Hardware Components
This chapter explains how to set up video I/O for your workstation.
The following components are included in your shipment.
NVIDIA Quadro FX 5600 graphics board The NVIDIA
®
Quadro
®
FX 5600 graphics board provides output
to your LCD monitor directly, and to the broadcast monitor via the NVIDIA Quadro SDI board.
Nvidia Quadro SDI Output adapter The Nvidia Quadro SDI Output adapter supplies 2K, HD, or SD video
output to a broadcast monitor, VTR, or SDI projector. The card features a BNC genlock connector that
connects to your facility’s sync generator.
AJA OEM-2K adapter and breakout box The AJA OEM-2K adapter provides video and audio I/O, and VTR
control. The adapter connects to the breakout box, and handles SD (NTSC, PAL), and HD at a depth of 8
and 10 bits.
LCD graphics monitor The graphics monitor features a wide screen with a 16:9 aspect ratio, and a maximum
resolution of 1920x1200.
AJA HD5DA video distribution amplifier The AJA distribution amplifier receives its signal from the Nvidia
SDI Output adapter and drives a VTR and broadcast monitor. The distribution amplifier is also necessary in
order to use the Real-Time Deliverables feature.
4
21
To Next Page
Loading...
