HP xw8600

QuickSpecs
HP xw8600 Workstation
Technical Specifications - Monitors
DA – 12849 Worldwide • Version 10 • June 1, 2008 Page 83
• EPEAT - Silver
Energy Consumption
(in accordance with US
Energy Star test method)
AC Input
Voltage at 100
VAC +/- 5
VAC, 50 Hz
+/- 3 Hz
AC Input
Voltage at 115
VAC +/- 5
VAC, 60 Hz
+/- 3 Hz
AC Input
Voltage at 230
VAC +/- 5
VAC, 50 Hz
+/- 3 Hz
Normal Operation
102.8 watts 101.7 watts 100.4watts
Sleep
1
2 watts 2 watts 2 watts
Off
0.05 watts 0.06 watts 0.25 watts
Heat Dissipation
2
AC Input
Voltage at 100
VAC +/- 5
VAC, 50 Hz
+/- 3 Hz
AC Input
Voltage at 115
VAC +/- 5
VAC, 60 Hz
+/- 3 Hz
AC Input
Voltage at 230
VAC +/- 5
VAC, 50 Hz
+/- 3 Hz
Normal Operation
350.8 BTU/hr 347.0 BTU/hr 342.6 BTU/hr
Sleep
6.8 BTU/hr 6.8 BTU/hr 6.8 BTU/hr
Off
0.2 BTU/hr 0.2 BTU/hr 0.9 BTU/hr
NOTES
1
This sleep status ignore the input sync signal check cycle when metering
the model in sleep mode.
2
Heat dissipation is calculated based on the measured watts, assuming
the service level is attained for one hour.
Longevity and
Upgrading
Upgradeability features contained in the
product include:
One upstream and four downstream USB ports
Ergonomics
The monitor meets the ergonomic requirement
of EN-ISO 13406-2 for flat panel displays.
Additional
Information
This product is in compliance with the
Restrictions of Hazardous Substances (RoHS)
Directive, 2002/95/EC.
This HP product is designed to comply with the
Waste Electrical and Electronic Equipment
(WEEE) Directive, 2002/96/EC.
This product is in compliance with California
Proposition 65 (State of California; Safe
Drinking Water and Toxic Enforcement Act of
1986).
This product is in compliance with the IEEE
1680 (EPEAT) standard at the SILVER level, see
www.epeat.net.