HP xw8600

QuickSpecs
HP xw8600 Workstation
Technical Specifications - Monitors
DA – 12849 Worldwide • Version 10 • June 1, 2008 Page 84
Plastics parts weighing over 25 grams used in
the product are marked per ISO 11469 and
ISO1043.
Display meets the requirement for low
frequency electromagnetic fields per MPR-II,
TCO, and prEN50279 A/B/C.
This product contains 0% recycled materials
(by wt.)
This product is 97.6% recycleable when
properly disposed of at end of life.
Packaging Materials
• Corrugated Paper 2.19 kg
• PE-LD Bags 0.09 kg
• EPS Molded Foam 1.07 kg
RoHS Compliance
Hewlett-Packard is committed to compliance
with all applicable environmental laws and
regulations, including the European Union
Restriction of Hazardous Substances (RoHS)
Directive. HP's goal is to exceed compliance
obligations by meeting the requirements of the
RoHS Directive on a worldwide basis. By July
1, 2006, RoHS substances will be virtually
eliminated (virtually = to levels below legal
limits) for all HP electronic products subject to
the RoHS Directive, except where it is widely
recognized that there is no technically feasible
alternative (as indicated by an exemption
under the EU RoHS Directive).
Material Usage
This product does not contain any of the
following substances in excess of regulatory
limits (refer to the HP General Specification for
the
Environment at
http://www.hp.com/hpinfo/globalcitizenship
/environment/supplychain/gen_specifications.
html):
• Asbestos
• Certain Azo Colorants
• Certain Brominated Flame Retardants -
may not be used as flame retardants in
plastics