EasyManuals Logo

HP Z440 Technical White Paper

HP Z440
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
Technical white paper | HP Z440 Workstation
Creating RAID Arrays on the SATA and sSATA controllers
RAID arrays on SATA and sSATA controllers can be created through Option ROM (OROM) at power on, UEFI driver within
3rd Party Option ROM Management from the BIOS Startup Menu, DOS utilities, EFI shell utilities, Windows command
line utilities, or from a graphical user interface (GUI) within the Windows OS.
1. Pre-OS RAID creation through the Option ROM (OROM)
In order to use the OROM for conguration of RAID arrays, the Option ROM Launch Policy in BIOS must be set to All
Legacy. This is the default as shipped conguration and can be changed in BIOS Setup under Advanced > Option ROM
Launch Policy.
To access the OROM, press Ctrl-I as soon as you see Intel® Rapid Storage Technology enterprise - <controller name>
Option ROM, where controller name is the name of the controller (either SATA or sSATA) where you want to set up the
RAID array.
The OROM will only display at power on if there are two or more RAID capable devices attached to the controller, or a
single device is attached that contains RAID metadata. In the later case, the OROM will show that the RAID is failed or
degraded.
Once in the OROM, you can Create RAID Volumes, Delete RAID Volumes, Reset Disks to Non-RAID, or Exit. The keys
available for use are listed at the bottom of the screen.
Example: RAID volume creation on the SATA or sSATA controllers through OROM.
a) Use the Up/Down arrows to navigate to “1. Create RAID Volume” if not already selected.
b) Enter the desired volume name and press Tab or Enter.
c) Use the Up/Down arrows to scroll through available RAID levels. A description of the level will appear in the “HELP
box. Select the desired RAID level and press Tab or Enter.
d) Press Enter to open the “SELECT DISKS” window.
e) Use the Up/Down arrows to highlight a desired disk and press Space to select the disk. Press Enter after you have
selected all of the disks that you want to be included in the RAID.
f) If you are creating a RAID array that is striped, you can use the Up/Down arrows to change strip size if desired. Press
Enter when done.
g) Capacity will be automatically calculated for you based on the RAID type. The capacity shown may be around 95%
of the actual available capacity. In a mirrored array, the reserved space helps to ensure that a failed drive can be
replaced with another drive of the same listed capacity even if the actual capacity is slightly less than the listed
capacity. Press Enter to accept the default capacity.
h) Press Enter to create the volume.
Similarly a user can Delete RAID volumes or reset disks to Non-RAID status by following the on screen prompts and using
the keys listed at the bottom of each screen.

Other manuals for HP Z440

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Z440 and is the answer not in the manual?

HP Z440 Specifications

General IconGeneral
Tcase66.2 °C
Bus typeQPI
SteppingR2
FSB ParityNo
Processor cache10 MB
Processor cores4
Processor modelE5-1620V3
System bus rate0 GT/s
Processor seriesIntel Xeon E5-1600 v3
Processor socketLGA 2011-v3
Processor threads8
Processor codenameHaswell
Number of QPI links0
Processor frequency3.5 GHz
Processor cache typeSmart Cache
Processor lithography22 nm
Processor manufacturerIntel
Processor front side bus- MHz
PCI Express slots version3.0
Processor boost frequency3.6 GHz
Processor operating modes64-bit
ECC supported by processorYes
PCI Express configurations1x4, 1x8, 1x16
Thermal Design Power (TDP)140 W
Number of processors installed1
Maximum number of PCI Express lanes40
Memory types supported by processorDDR4-SDRAM
Memory clock speeds supported by processor1333, 1600, 1866, 2133 MHz
Memory bandwidth supported by processor (max)68 GB/s
Maximum internal memory supported by processor768 GB
Memory slots8x DIMM
Internal memory16 GB
Memory channelsQuad-channel
Memory clock speed2133 MHz
Maximum internal memory128 GB
Memory layout (slots x size)2 x 8 GB
SSD capacityThe Solid State Drive's storage capacity in Gigabytes.
SSD interfacePCI Express
Storage mediaSSD
Optical drive typeDVD Super Multi
Total storage capacity256 GB
BD interface typeSATA
Discrete graphics card modelNot available
Recovery operating systemWindows 8.1 Pro
Operating system installedWindows 7 Professional
Cabling technology10/100/1000Base-T(X)
Ethernet LAN data rates10, 100, 1000 Mbit/s
PS/2 ports quantity2
USB 2.0 ports quantity5
Chassis typeMini Tower
Product colorBlack
Country of originChina
Audio systemHD
Product typeWorkstation
Motherboard chipsetIntel® C612
Scalability1S
Processor codeSR20P
Processor ARK ID82763
Intel TSX-NI version0.00
Processor package size52.5 x 45.0 mm
Supported instruction setsAVX 2.0
Intel Identity Protection Technology version1.00
Intel® Small Business Advantage (Intel® SBA)-
Power supply700 W
Sustainability certificatesENERGY STAR
Weight and Dimensions IconWeight and Dimensions
Depth445 mm
Width169 mm
Height432 mm
Weight11000 g

Related product manuals