Need help?Do you have a question about the HP Z400 and is the answer not in the manual?
General| Bus type | QPI |
|---|---|
| Processor cache | 4 MB |
| Processor cores | 2 |
| Processor model | W3503 |
| System bus rate | 4.8 GT/s |
| Processor socket | - |
| Processor frequency | 2.4 GHz |
| Processor cache type | Smart Cache |
| Processor lithography | 45 nm |
| Processor manufacturer | Intel |
| PCI Express slots version | 2.0 |
| Processor operating modes | 64-bit |
| ECC supported by processor | Yes |
| Thermal Design Power (TDP) | 130 W |
| Number of processors installed | 1 |
| Memory types supported by processor | DDR3-SDRAM |
| Memory clock speeds supported by processor | 800, 1066 MHz |
| Memory bandwidth supported by processor (max) | 25.6 GB/s |
| Maximum internal memory supported by processor | 24 GB |
| Audio system | Realtek ALC262 |
| Product type | Workstation |
| Motherboard chipset | Intel® X58 Express |
| Memory slots | 6x DIMM |
| Internal memory | 4 GB |
| Memory channels | Triple-channel |
| Memory clock speed | 1066 MHz |
| Memory layout (slots x size) | - GB |
| Graphics card | Quadro 600 |
| Networking features | Gigabit Ethernet (10/100/1000) |
| Graphics card family | NVIDIA |
| HDD speed | - RPM |
| RAID levels | 0, 1, 5, 10 |
| HDD capacity | 500 GB |
| HDD interface | SATA II |
| Storage media | HDD |
| Display included | No |
| USB 2.0 ports quantity | 8 |
| Parallel ports quantity | 0 |
| Chassis type | Minitower |
| Country of origin | China |
| Number of 5.25\" bays | 3 |
| Operating system installed | Windows 7 Professional |
| Operating system architecture | 32-bit |
| Power supply | 475 W |
| Processor ARK ID | 40800 |
| Processor package size | 42.5 x 45 mm |
| Supported instruction sets | SSE4.2 |
Weight and Dimensions| Depth | 455.3 mm |
|---|---|
| Width | 167.9 mm |
| Height | 450.2 mm |
| Weight | 13500 g |
Overview of workstation system board architecture and components.
Chassis, power supply, and environmental specifications for the workstation.
Details on accessing and using the F10 Setup Utility for system configuration.
Overview of capabilities, features, and components for workstation management.
Essential safety warnings and precautions before handling components.
Precautions and methods for preventing Electrostatic Discharge (ESD) damage.
Scenarios and possible solutions for common Windows-based workstation problems.
How to use HP Vision Diagnostics for hardware troubleshooting.
Information on diagnostic LEDs, beep codes, and POST error messages.
To Next Page
