Side access panel solenoid lock (optional)
The side access panel solenoid locks the side access panel to the chassis. The solenoid is controlled by
a local or remote signal.
To lock the solenoid, set a password for the solenoid lock in the Computer Setup (F10) Utility. To unlock
the solenoid, remove the solenoid lock password in the Computer Setup (F10) Utility.
The solenoid lock FailSafe Key–available from HP–is is a device for manually disabling the solenoid
lock. You will need the FailSafe Key in case of forgotten password, power loss, or workstation
malfunction.
ENWW
Workstation management
61
To Next Page
Loading...
