Figure 8-3 The Receiver timeout error property menu is grayed out
Receiver general properties
The general properties are listed below. After each property, the default value is listed in parenthesis.
Rgreceiver.IsBordersEnabled=bool （default=1）
Rgreceiver.IsBordersEnabled.IsMutable=bool （default=1）
If set to 1, the borders on the Remote Display Window will be enabled (displayed). If set to 0, the
borders will be removed creating a borderless windows to display the Remote Computer desktop. The
default value is 1— the borders are enabled.
Rgreceiver.IsSnapEnabled=bool （1）
Rgreceiver.IsSnapEnabled.IsMutable=bool （1）
If set to 1, as the Remote Display Window is being positioned on the display, the window will snap to
the edge of the screen when the top edge of the window moves within 10 pixels of the top of the
display, or when the left edge of the window moves within 10 pixels of the left edge of the display. The
default value is 1—snap is enabled.
Rgreceiver.IsAlwaysPromptCredentialsEnabled=bool （0）
Rgreceiver.IsAlwaysPromptCredentialsEnabled.IsMutable=bool （1）
If set to 1, when connecting to an RGS Sender, the user will always be prompted for the domain,
username and password. There will be no attempt to automatically verify the user credentials. The
default value is 0—prompting for credentials is off.
172 Chapter 8 RGS properties
To Next Page
Loading...
