HP ZR2040w Quickspecs

1. Source: Selects the video input (DVI or DisplayPort) 5. Power LED: Blue = Fully powered.
Amber = Sleep mode.
Continuous Flashing Blue (0.5 Hz) = Unsupported Mode
Three Flashes of Blue (0.5 Hz) = Upper or Lower Limit of
Brightness Control
2. Minus (-): Decreases Brightness adjustment level.
3. Plus (+): increases Brightness adjustment level
4. Power: Turns the monitor on or off if Master Power Switch
(rear) is On.
HP ZR2740w Bezel Buttons
Models
XW476A4, XW476A8
QuickSpecs
HP ZR2740w 27-inch LED Backlit IPS Monitor
Overview
DA - 14144 North America — Version 5 — June 25, 2013 Page 1

HP ZR2040w Specifications

General

Screen Size	20 inches
Resolution	1600 x 900
Brightness	250 cd/m²
Contrast Ratio	1000:1
Aspect Ratio	16:9
Viewing Angles	178° horizontal, 178° vertical
Connectivity	DVI-D, VGA
Response Time	8 ms (gray to gray)