Jump Starting a Vehicle
This portable jump starter is also equipped with two smart USB outputs
that provide the fastest charging speed (Output 1: 5V2.4A, Output 2:
5V/3A 9V/2A 12V/1.5A, for your portable electronic devices, such
as phones, tablets, Bluetooth earphones, etc.
To jump start a vehicle:
1.Make sure the jump starter is fully
charged.
2.Turn off the vehicle's ignition and all
electronic devices.
3.Connect the red clamp to the positive
(+) terminal of the vehicle's battery.
4.Connect the black clamp to the negative
(-) terminal or a suitable vehicle ground.
5.Turn on the jump starter by pressing the
power button.
6.Start the vehicle's engine.
7.Once the engine starts, disconnect the black
clamp first, then the red clamp.
8.Turn off the jump starter.
To Next Page
Loading...