9
1.3 LANGUAGE SETTINGS
Usually the right language is preprogrammed. If this is not the case or if it needs to be changed, this
can be done via the main menu. Select the following symbol as shown in the left image.
A screen with different flags will appear. The highlighted flag is the language that is currently set.
Select the desired flag; it will be highlighted.
Press ◄ to go back to the previous screen.
1.4 LEVELING FUNCTIONS
Auto lvl 1 Automatic levelling based on a pre-set value.
Auto lvl 2 Automatic setting based on a pre-set value. This setting is not necessarily level.
Tank Automatic programmed slant intended to drain waste water.
Stabilize Automatically deploying the jacks based on pressure. The vehicle will not be lifted,
and the wheels will stay on the ground.
Manual Manually operating the jacks. This is always done per two jacks.
Retract Automatically retract all jacks.
To Next Page