MF877-00 Page 4
Template Revision A
HPE instructions for this template are available at MF877-01
1. Unplug Megacell battery connector from motherboard
2. Pull out the Megacell battery module from Megacell holder
POWER CAPACITOR – 350W ATX PSU
Heat the solder of Electrolytic Capacitors greater than 2.5cm in diameter or height and remove it
POWER CAPACITOR – 550W ATX PSU
Heat the solder of Electrolytic Capacitors greater than 2.5cm in diameter or height and remove it
To Next Page
Loading...
