To Next PageTo Next Page
Need help?Do you have a question about the HPE ProLiant MicroServer Gen10 Plus and is the answer not in the manual?
General| Processor Cores | 4 |
|---|---|
| Memory Slots | 2 |
| Network | 2 x 1GbE ports |
| Processor | Intel Xeon E-2224 |
| Processor Base Frequency | 3.4 GHz |
| Storage | 4 LFF SATA HDD bays |
| Storage Controller | Embedded SATA controller |
| Expansion Slots | 1 PCIe 3.0 x16 slot |
| Form Factor | Ultra-micro tower |
| Remote Management | HPE iLO 5 |
| Operating System Support | Microsoft Windows Server, Red Hat Enterprise Linux, VMware ESXi |
| Dimensions | 22.97 x 24.5 x 24.5 cm (8.98 x 9.65 x 9.65 in) |
Instructions for powering on the HPE ProLiant MicroServer Gen10 Plus, including different methods.
Procedures for safely shutting down the server for maintenance or upgrades.
Overview of options for the initial setup and installation of the server.
Detailed steps for unboxing, orienting, and connecting the server for initial use.
Information on supported drive types, bay configurations, and controller options for storage.
Details on server memory configuration, including DIMM slots, capacity, and population guidelines.
Information about the embedded and optional HPE Smart Array storage controllers.
Details on the integrated Lights-Out management processor for remote server control.
Information on the server setup and deployment tool for OS and firmware installation.
