To Next PageTo Next Page
Need help?Do you have a question about the HPE ProLiant DL380 Gen10 and is the answer not in the manual?
General| Form Factor | 2U Rack |
|---|---|
| Expansion Slots | Up to 8 PCIe 3.0 slots |
| Management | HPE iLO 5 |
| Processor | Intel Xeon Scalable processors |
| Memory | Up to 3TB DDR4 (24 DIMM slots) |
| Storage | Up to 12 LFF SAS/SATA/SSD |
| Power Supply | HPE Flexible Slot Power Supplies |
| RAID | HPE Smart Array controllers |
| Operating System Support | Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi |
Details the various components on the server's front panel.
Identifies and describes components on the server's rear panel.
Details various components located on the server's system board.
Explains how to interpret DIMM labels for characteristics.
Details how to identify NVDIMM characteristics from labels.
Explains how drives are numbered in various configurations.
Illustrates and describes different riser card types.
Covers procedures for powering the server on and off.
Instructions for extending and removing the server from the rack.
Guidance on securing cables with the server's cable management arm.
Information on available support packages and services.
Prerequisites and steps for initial server setup.
Details on installing and configuring power supplies.
Information on HPE Smart Storage Battery and Hybrid Capacitor.
Step-by-step guides for installing DIMMs and NVDIMMs.
Procedures for installing various storage controllers.
Instructions for installing various drive cages.
Steps for installing primary, secondary, and tertiary riser cages.
Procedure for installing accelerator or GPU cards.
Detailed steps for installing a server processor.
Information and installation of the HPE TPM 2.0 module.
General guidelines for connecting storage cables in DL servers.
Diagram showing cable routing for front 2SFF drive option.
Shows cabling between SAS expander and controller.
Details cabling for the Smart Array P824i-P controller.
Information on server health monitoring and data collection.
Details on remote server management processor.
Configuration tools embedded in system ROM.
Tool for configuring HPE Smart Array SR controllers.
How NMI crash dumps aid in problem diagnosis.
Lists available troubleshooting guides and resources.
Step-by-step instructions for removing the battery.
Details operating and non-operating environmental ranges.
Provides dimensions and weight of the server.
Technical specifications for various server power supplies.
How to access HPE support and documentation.
How to provide feedback on the documentation.
