HPE ProLiant DL380 Gen10 - Installing a Front 8 SFF SAS;SATA Drive Cage in Box 1

Installing a front 8SFF SAS/SATA drive cage in box 1
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
• T-10 Torx screwdriver
• The components included with the hardware option kit
Procedure
1.
Power down the server.
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
•
Extend the server from the rack.
• Remove the server from the rack.
4.
Remove the access panel.
5. Remove the air bale.
6. Remove the fan cage.
7. Remove the bay blank.
Hardware options installation
103