To Next PageTo Next Page
Need help?Do you have a question about the HPE ProLiant DL160 Gen10 and is the answer not in the manual?
General| Expansion Slots | Up to 3 PCIe 3.0 slots |
|---|---|
| Management | HPE iLO 5 |
| Processor | Intel Xeon Scalable processors |
| Storage | 4 LFF |
| RAID Support | HPE Smart Array controllers |
| Form Factor | 1U Rack |
| Power Supply | 500W or 900W Flex Slot power supplies |
Identifies components on the server's front panel, including drives, ports, and LEDs.
Identifies components on the server's rear panel, such as ports and power supplies.
Details the types, form factors, and supported expansion boards for PCIe slots.
Identifies key components located on the server's system board.
Explains the status and function of front panel LEDs and buttons.
Describes the LED indicators and buttons for server drives.
Provides instructions on how to turn on the server using various methods.
Details the procedures for safely shutting down the server.
Step-by-step guide to extend the server from its rack position for maintenance.
Instructions for safely removing the server from the rack.
Procedure to remove the server's access panel for internal component access.
Guidance on preparing for the first-time installation of the server.
Covers prerequisites and initial configuration steps for the server.
Outlines necessary environmental and operational conditions for the server.
Lists important safety advisories for handling and operating the server.
Instructions for adding a second power supply for redundancy.
Procedure for installing a hot-plug AC power supply unit.
Information regarding server memory modules and their specifications.
Step-by-step guide for installing a memory module (DIMM).
Details on supported server drive types and installation guidelines.
Procedure for installing SAS or SATA hot-plug drives.
Overview of available storage controller options.
Procedure for installing a modular Smart Array controller.
Information on installing processor heatsinks for thermal management.
Details for installing and enabling the TPM 2.0 security module.
Steps to enable the Trusted Platform Module after installation.
Best practices and tips for connecting server cables correctly.
Specific cabling instructions for the four-bay LFF drive backplane.
Instructions for connecting the optical drive cable.
Cabling procedures for M.2 SATA SSDs.
Information on the integrated Lights-Out management processor for remote control.
Overview of the server deployment and provisioning tool.
Utilities embedded in system ROM for configuration and diagnostics.
Tool for configuring HPE Smart Array storage controllers.
Enables creation of crash dump files for hung systems.
Lists available documentation and guides for resolving server issues.
Details about the internal system battery and associated warnings.
Step-by-step procedure for replacing the system's internal battery.
Compliance and legal information for the product.
Details and links regarding product warranty coverage.
Operating environment requirements including temperature and humidity.
Physical dimensions and weight of the server.
Technical details for the server's power supply units.
Guidance on how to contact HPE for technical support and services.
Information about available remote support services for the server.
