To Next PageTo Next Page
Need help?Do you have a question about the HPE ProLiant DL180 Gen10 and is the answer not in the manual?
General| Processor Sockets | 2 |
|---|---|
| Memory Slots | 16 DIMM slots |
| Drive Supported | SAS, SATA, SSD |
| RAID Support | HPE Smart Array Controllers |
| Expansion Slots | Up to 6 PCIe 3.0 slots |
| Form Factor | 2U Rack |
| Management | HPE iLO 5 |
| Processor | Intel Xeon Scalable processors |
| CPU Product Family | Intel Xeon Scalable |
| Memory Type | DDR4 SmartMemory |
| Storage | Supports SAS, SATA, and NVMe drives |
| Drive Bays | Up to 12 LFF or 24 SFF |
| Network | 4 x 1GbE |
| Network Controller | Optional FlexibleLOM or stand-up card |
| Power Supply | 800W |
| Chipset | Intel C621 |
| Operating System Support | Windows, Linux, VMware |
| Power Supply Options | 800W |
Identifies and describes components on the server's front panel.
Identifies and describes components located on the rear of the server.
Details the specifications and types of PCIe riser board slots available.
Illustrates and labels the various components on the server's system board.
Provides procedures for powering on the server using various methods.
Step-by-step instructions for safely removing the server from a rack.
Details the procedure for removing the server's access panel for internal access.
Outlines options for performing the initial server setup and installation.
Covers essential steps and prerequisites for configuring the server after unboxing.
Specifies the necessary physical space and ventilation for server installation.
Lists important safety warnings and cautions related to server handling and operation.
Instructions for installing the front bezel and its security lock.
Covers guidelines and information for installing various SAS and SATA drive types.
Details compatible storage controllers and installation guidelines for Smart Array controllers.
Provides instructions for installing the M.2 SSD enablement board and M.2 SSD.
General rules and best practices for connecting and disconnecting server cables.
Illustrates cable routing for Large Form Factor (LFF) drives to the system board.
Illustrates cable routing for Small Form Factor (SFF) drives to controllers.
Information on iLO 5, a remote server management processor for monitoring and control.
Details the server deployment tool for OS installation and system setup.
Explains the embedded system ROM features for configuration activities.
Provides information about the internal battery and safety precautions.
Step-by-step procedure for replacing the server's system battery.
Lists available documents and online resources for resolving server issues.
Details operating and non-operating environmental conditions like temperature and humidity.
Lists the physical dimensions and weight specifications of the server.
Provides detailed specifications for various power supply options available for the server.
