EasyManua.ls Logo

HPE ProLiant DL325 Gen10 User Manual

HPE ProLiant DL325 Gen10
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
HPE ProLiant DL325 Gen10 Server User Guide
Part Number: P02217-003
Published: August 2019
Edition: 3
Abstract
This document is for the person who installs, administers, and troubleshoots servers and storage systems.
Hewlett Packard Enterprise assumes you are qualified in the servicing of computer equipment and trained in
recognizing hazards in products with hazardous energy levels.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the HPE ProLiant DL325 Gen10 and is the answer not in the manual?

HPE ProLiant DL325 Gen10 Specifications

General IconGeneral
ProcessorAMD EPYC 7000 series
Processor Sockets1
Memory Slots16 DIMM slots
Form Factor1U rack
Remote ManagementHPE iLO 5
MemoryUp to 2 TB DDR4
StorageUp to 10 SFF or 4 LFF drives
RAID SupportHPE Smart Array Controllers
Power SupplyUp to 2 x 800W or 500W Flex Slot PSUs
Expansion Slots3 PCIe 3.0 slots
Operating System SupportWindows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware

Summary

Component Identification

Front Panel Components

Describes the physical components on the server's front.

Front Panel LEDs and Buttons

Explains the status indicators and controls on the front.

Rear Panel Components

Details the physical components on the server's rear.

System Board Components

Identifies key parts on the motherboard.

Drive Status Indicators

Explains LEDs and buttons for drives.

Server Operations

Bezel Management Procedures

Steps for removing and installing the server bezel.

Server Power Management

Instructions for powering the server on and off.

Rack Server Installation and Extension

Procedures for accessing and extending the server in the rack.

Internal Component Access and Removal

Steps to remove server access panels and air baffles.

Riser Cage and Blank Handling

Instructions for working with riser cages and blanks.

Media Bay and Serial Port Procedures

Procedures for removing media bay blanks and serial ports.

Server Setup and Initial Installation

Server Setup Prerequisites and Requirements

Details requirements before setting up the server.

Rack Server Installation Guide

Step-by-step guide to installing the server in a rack.

POST Screen Options and OS Deployment

Explains POST options and OS installation methods.

Hardware Options Installation Guide

Drive, Cage, and Controller Installation

Guides for installing drives, cages, and controllers.

Expansion Slot, GPU, and System Options

Instructions for installing expansion boards, GPUs, and TPMs.

Memory, Networking, and Peripheral Options

Details on memory, FlexibleLOM, serial ports, and intrusion detection.

Optical Drive, Fan, and Power Supply Installation

Procedures for installing ODDs, fans, and power supplies.

Cabling and Connectivity

General Cabling Guidelines and Best Practices

General rules for server cabling.

Drive and Storage Controller Cabling

Routing for drive backplanes and controllers.

System Component Cabling Procedures

Routing for ODD, iLO, Power, GPU, I/O, USB, M.2, and Energy Pack.

Software and Management Utilities

HPE Integrated Lights-Out (iLO) 5 Features

Remote server management and monitoring capabilities.

Intelligent Provisioning and OS Deployment

Tools for server setup and OS installation.

System Configuration Utilities (UEFI)

BIOS settings, boot modes, and security features.

Firmware and Software Update Procedures

Methods for updating system firmware and drivers.

System Battery Management

System Battery Information and Warnings

Details on the server's real-time clock battery and risks.

Battery Replacement Procedure

Step-by-step guide to replace the system battery.

Troubleshooting and Diagnostics

NMI Crash Dump Analysis

Understanding system hangs via crash dumps.

Troubleshooting Documentation and Resources

Lists available guides and information for issue resolution.

Safety, Warranty, and Compliance Information

Regulatory and Environmental Compliance

Safety, REACH, RoHS, and regional notices.

Product Warranty Information

Details on warranty coverage for HPE products.

Technical Specifications

Environmental Operating Conditions

Temperature, humidity, and altitude limits.

Mechanical Dimensions and Weight

Physical size and mass of the server.

Power Supply Unit Specifications

Electrical requirements and outputs for PSUs.

Useful Websites and Resources

Hewlett Packard Enterprise Information Library

Access to technical documentation and knowledge base.

HPE ProLiant DL325 Gen10 Server Resources

Links to QuickSpecs, support pages, and user documents.

Support and Service Information

Accessing Hewlett Packard Enterprise Support

Contacting support and downloading updates.

Remote Support and Proactive Care Services

Services for remote monitoring and proactive assistance.

Customer Self Repair (CSR) Program Details

Information on user-based repair services.

Related product manuals