Need help?Do you have a question about the HPE ProLiant DL325 Gen11 and is the answer not in the manual?
General| Processor | AMD EPYC 9004 Series |
|---|---|
| Maximum Processors | 1 |
| Cores per Processor | Up to 96 cores |
| Form Factor | 1U Rack |
| Remote Management | HPE iLO 6 |
| RAID Support | HPE Smart Array Controllers |
| Power Supply | Redundant HPE 800W, 1000W, 1600W power supplies |
| Network Controller | Optional OCP 3.0 or stand-up card |
| Operating System Support | Windows Server, Linux, VMware |
| Storage | Up to 10 SFF or 4 LFF drives |
Details front and rear panel ports, buttons, LEDs, and external features.
Identifies key internal hardware like system board, riser cages, and slots.
Explains drive bay numbering, backplane naming, and drive LEDs.
Covers fans, heatsinks, liquid cooling, TPM, and boot devices.
Steps for initial setup and essential operational/environmental needs.
Guidance and warnings for safely installing the server in a rack.
Procedures for removing/installing basic server parts like bezels, covers, fans, and riser cages.
General procedures and considerations for installing various hardware options.
Details for installing drives, storage controllers, expansion cards, accelerators, memory, and networking.
Procedures for installing heatsinks, fans, power supplies, boot devices, and M.2 SSDs.
General rules and detailed diagrams for connecting server cables.
Resources for updating firmware, configuring servers, and security.
Information on NMI, troubleshooting resources, and battery replacement.
Regulatory compliance, warranty, and technical specifications.
To Next Page
