The installation is complete.
Installing the front bezel optionInstalling the front bezel option
ProcedureProcedure
1. Attach the front bezel to the right chassis ear.
2. Press and hold the front bezel release latch.
3. Close the front bezel.
4. (Optional) Install the Kensington security lock.
For more information, see the lock documentation.
ResultsResults
The installation is complete.
Power supply optionsPower supply options
Depending on the installed options and the regional location where the server was purchased, the server can be configured with one of the
supported power supplies.
SubtopicsSubtopics
Hot-plug power supply calculationsHot-plug power supply calculations
Power supply warnings and cautionsPower supply warnings and cautions
DC power supply warnings and cautionsDC power supply warnings and cautions
DC power supply wire colorsDC power supply wire colors
Installing an AC power supplyInstalling an AC power supply
To Next Page
Loading...
