HPE ProLiant DL325 User Manual

HPE ProLiant DL325 Gen10 Server
Maintenance and Service Guide
Part Number: P02216-003
Published: April 2019
Edition: 3
Abstract
This guide describes identification and maintenance procedures, diagnostic tools,
specifications and requirements for hardware components and software. This guide is for an
experienced service technician. Hewlett Packard Enterprise assumes that you are qualified in
the servicing of computer equipment, trained in recognizing hazards in products, and are
familiar with weight and stability precautions.

HPE ProLiant DL325 Specifications

General

Brand	HPE
Model	ProLiant DL325
Category	Server
Language	English

Summary

Customer Self Repair

Illustrated Parts Catalog

Mechanical Components

System Components

Removal and Replacement Procedures

Safety Considerations

Essential safety precautions, including ESD prevention and hazard symbols.

Preparation Procedures

Steps required before accessing or removing internal server components.

Troubleshooting

Troubleshooting Resources

Diagnostic Tools

UEFI System Utilities

System ROM embedded utilities for configuration and system management.

Intelligent Provisioning

Server deployment tool for simplifying OS installation and system setup.

HPE Insight Remote Support

HPE Smart Storage Administrator

Tool for configuring HPE Smart Array SR controllers and managing storage arrays.

Component Identification

Front Panel Components

Identifies ports, LEDs, and bays on the server's front chassis.

Front Panel LEDs and Buttons

Rear Panel Components

System Board Components

Illustrates and labels various connectors and components on the system board.

Drive LEDs and Buttons

Defines the status indicators and buttons for server drive bays.

Cabling

Specifications

Power Supply Specifications

Lists input/output specifications for various server power supply units.