Need help?Do you have a question about the HPE ProLiant DL320 Gen11 and is the answer not in the manual?
General| Product Type | Server |
|---|---|
| Form Factor | 1U Rack |
| Management | HPE iLO 6 |
| Memory | Up to 2 TB DDR5 |
| Storage | 4 x 3.5" or 8 x 2.5" drive bays |
| Storage Controller | HPE Smart Array S100i SR Gen11 |
| Network | Embedded 1GbE or 10GbE ports |
| Power Supply | 500W Flex Slot Platinum Hot Plug |
Identifies and describes front panel features and connectors.
Details the status and function of front panel LEDs and buttons.
Describes the rear panel layout and connectors.
Locates and identifies key components on the system board.
Describes the different types of riser boards used in the server.
Explains how drive bays are numbered and organized within the server.
Lists fan and heatsink requirements based on server configuration.
Provides an overview of the initial system installation process.
Describes the optional HPE installation service for server setup.
Details the steps and prerequisites for setting up the server after installation.
Explains the procedures for powering the server on.
Details the methods for safely powering down the server.
Step-by-step instructions for safely removing the server from a rack.
Provides instructions for installing the server into a rack with slide rails.
Lists and describes the supported drive types and configurations.
Instructions for installing an optical drive in the SFF or LFF chassis.
Information on installing various PCIe expansion cards.
Details on DIMM types, population, and installation.
Information on supported storage controllers and their configuration.
Guidelines and diagrams for internal component cabling.
To Next Page
