Rail identifier stamps on the mounting rail of the friction rack rail
Installing the rack rail optionInstalling the rack rail option
PrerequisitesPrerequisites
Rail identification markers
Make sure that the rail option is compatible with the server configuration.
Small slotted screwdriver—This tool is required if you intend to install the server in a threaded round-hole rack.
About this taskAbout this task
This server supports the friction rack rail option, also known as stab-in rail.
Friction rack rails consist of inner chassis rails that are attached to the server, and extendable mounting rails that are installed in the
rack.
To Next Page
Loading...
