HPE ProLiant DL320 Gen11

b. Install the screws (callout 2).
Install the fan wallInstall the fan wall
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have the following items available:
T-15 Torx screwdriver
T-10 Torx screwdriver—This tool is required if you plan to install the fan wall in the 10 or 12 LFF drive configuration or the 4 SFF or 8
E3.S drive configuration.
ProcedureProcedure
Install the fan wall.
Retain the screws and fan wall. These screws will be used to secure the fan wall after replacing or installing the internal component.
SFF or 4 LFF drive configuration:
HPE ProLiant DL320 Gen11 Server User Guide 59