ResultsResults
The installation is complete.
Memory optionsMemory options
IMPORTANT:IMPORTANT: This server does not support mixing LRDIMMs and RDIMMs. Attempting to mix any combination of these
DIMMs can cause the server to halt during BIOS initialization. All memory installed in the server must be of the same type.
SubtopicsSubtopics
DIMM population informationDIMM population information
HPE SmartMemory speed informationHPE SmartMemory speed information
Installing a DIMMInstalling a DIMM
DIMM population informationDIMM population information
For specific DIMM population information, see the DIMM population guidelines on the Hewlett Packard Enterprise website
(https://www.hpe.com/docs/server-memoryhttps://www.hpe.com/docs/server-memory).
HPE SmartMemory speed informationHPE SmartMemory speed information
For more information about memory speed information in HPE servers using Intel processors, see the Hewlett Packard Enterprise website
(https://www.hpe.com/docs/memory-speed-tablehttps://www.hpe.com/docs/memory-speed-table).
Installing a DIMMInstalling a DIMM
PrerequisitesPrerequisites
CAUTION:CAUTION:
Do not install RDIMMs and LRDIMMs in the same server.
Do not install ×4 and ×8 DRAM widths in the same server.
Attempting to mix any combination of these DIMMs can cause the server to halt during BIOS initialization. All memory
installed in the server must be of the same type.
CAUTION:CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
ProcedureProcedure
1. Power down the server.
2. If installed, open the cable management arm .
To Next Page
Loading...
