21. Connect all peripheral cables to the server.
22. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
23. If installed, close the cable management arm.
24. Power up the server .
ResultsResults
The installation is complete.
Drive cage optionsDrive cage options
The server supports the following drive cage options:
2 SFF side-by-side drive cage
4 SFF drive cage
E3.S drive cage
To maintain proper system cooling, install the correct fan and heatsink types required for specific drive configurations. For more
information, see the product QuickSpecs on the HPE ProLiant DL320 Gen11 Server website:
https://buy.hpe.com/us/en/p/1014696061https://buy.hpe.com/us/en/p/1014696061
SubtopicsSubtopics
Installing the 2 SFF drive cageInstalling the 2 SFF drive cage
Installing the 4 SFF drive cageInstalling the 4 SFF drive cage
Installing the E3.S drive cageInstalling the E3.S drive cage
To Next Page
Loading...
