HPE ProLiant DL320 Gen11

BoxBox Drive baysDrive bays
1 1 and 2
2 1 and 2
In the SFF drive configuration:
Drives are assigned to box 1 and optional box 2.
SAS, SATA, NVMe are supported.
To manage the hot-plug SAS drive, install one of the following storage controllers:
HPE SR/MR type-p Gen11 storage controller
HPE MR type-o Gen11 storage controller (OROC)
When installing NVMe drives, install either all U.2 or all U.3 drives. Mixed NVMe drive type installation in the same box is not supported.
LFF drive bay numberingLFF drive bay numbering
The following drive backplane options are supported in all LFF drive configurations:
4 LFF 12G x1 SAS UBM2 LP
4 LFF 12G x1 SAS UBM6 LP
For more information on the drive backplane description, see Drive backplane naming.
4 LFF drive bay numbering4 LFF drive bay numbering
12 LFF drive bay numbering12 LFF drive bay numbering
Box 1
Box 3/Box 5
In the LFF drive configuration:
HPE ProLiant DL320 Gen11 Server User Guide 29