For more information on these cabling requirements, see the documentation that ships with the option.
13. Install the riser cage.
14. Install the access panel .
15. Install the server into the rack .
16. Connect all peripheral cables to the server.
17. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
18. If installed, close the cable management arm.
19. Power up the server .
ResultsResults
The installation is complete.
Accelerator optionsAccelerator options
This server supports various accelerator options to meet your computational and graphics workload requirements. For a list of supported
accelerator models, see the server QuickSpecs on the Hewlett Packard Enterprise website (https://buy.hpe.com/us/en/p/1014696061https://buy.hpe.com/us/en/p/1014696061).
PCIe workload accelerators—These options are PCIe card–based, direct–attach solutions that use solid–state storage technology
directly on the PCI bus to boost I/O performance and reduce latency to scale in line with your processing requirements.
Computational and graphics accelerators—These options deliver accelerated compute performance for a range of deep learning, high–
performance computing (HPC), and graphics–intensive applications.
SubtopicsSubtopics
Installing an accelerator in the GPU riser cageInstalling an accelerator in the GPU riser cage
To Next Page
Loading...
