Need help?Do you have a question about the HPE ProLiant DL380 Gen10 Plus and is the answer not in the manual?
General| Processor Sockets | 2 |
|---|---|
| Management | HPE iLO 5 |
| Expansion Slots | Up to 8 PCIe 4.0 slots |
| Form Factor | 2U rack |
| Processor | Intel Xeon Scalable processors |
| Memory Type | DDR4 |
| Storage | Up to 12 LFF drives |
| Network | Embedded 1GbE |
| Power Supply | 800W |
| Operating System Support | Windows Server, Linux, VMware |
| RAID Support | HPE Smart Array (RAID 0, 1, 5, 6, 10, 50, 60) |
Identifies front panel elements like drive bays, ports, and buttons on SFF, UMB, and LFF models.
Details rear panel ports and slots, including riser slots and I/O connectors.
Illustrates and labels key components on the server's main logic board.
Explains drive box configurations and sequential drive numbering across different models.
Describes the meaning of various LEDs on the front, rear, and Systems Insight Display.
Covers procedures for powering the server on/off and rack installation/removal.
Outlines necessary steps and prerequisites before server setup.
Details environmental, power, and grounding specifications for safe operation.
Introduces the process and categories for installing server hardware upgrades.
Provides instructions and visual guides for server cable routing and connections.
Lists and describes various software tools for server management and configuration.
Explains the use of iLO for remote server monitoring, configuration, and management.
Details BIOS configuration, boot mode selection, and secure boot settings.
Describes the tool for automated server setup and OS installation.
Provides methods for updating system firmware, BIOS, and drivers.
Guides on diagnosing and resolving server issues with available documentation.
Step-by-step instructions for replacing the real-time clock battery.
Lists environmental, mechanical, and power supply details for the server.
Provides links and information for accessing HPE support, updates, and warranty.
To Next Page