Battery replacementBattery replacement
If the server no longer automatically displays the correct date and time, you may need to replace the battery that provides power to the
real-time clock.
WARNING:WARNING: The computer contains an internal lithium manganese dioxide, a vanadium pentoxide, or an alkaline battery
pack. A risk of fire and burns exists if the battery pack is not properly handled. To reduce the risk of personal injury:
Do not attempt to recharge the battery.
Do not expose the battery to temperatures higher than 60°C (140°F).
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
Replace only with the spare designated for this product.
To remove the component:
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
4. Remove the access panel .
5. If installed, remove the secondary PCIe riser cage .
6. Locate the battery.
7. Remove the battery.
For more information about battery replacement or proper disposal, contact an authorized reseller or an authorized service provider.
To Next Page
Loading...
