HPE ProLiant DL380 Gen10 Plus - LED Indicators and Status Definitions

Front panel LEDs and buttonsFront panel LEDs and buttons
SFF front panel LEDs and buttonsSFF front panel LEDs and buttons
ItemItem DescriptionDescription StatusStatus
1 UID button/LED
Solid blue = Activated
Flashing blue:
1 Hz/cycle per sec = Remote management
or firmware upgrade in progress
4 Hz/cycle per sec = iLO manual reboot
sequence initiated
8 Hz/cycle per sec = iLO manual reboot
sequence in progress
Off = Deactivated
2 NIC status LED
Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network
active
Off = No network activity
3 Health LED
Solid green = Normal
Flashing green (1 Hz/cycle per sec) = iLO is
rebooting
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System
critical
1
1
1
2
Front panel LEDs and buttons 13