To Next PageTo Next Page
Need help?Do you have a question about the HPE ProLiant DL388 Gen10 and is the answer not in the manual?
General| Form Factor | 2U Rack |
|---|---|
| Processor | Intel Xeon Scalable processors |
| Management | HPE iLO 5 |
| Expansion Slots | Up to 7 PCIe 3.0 slots |
| Memory | Up to 3 TB with 24 DIMM slots |
| Storage | SAS, SATA, or NVMe drives |
| RAID Support | HPE Smart Array controllers with various RAID levels (0, 1, 5, 6, 10, 50, 60) |
| Network | HPE FlexibleLOM |
| Power Supply | Redundant power supplies |
| Operating System Support | Microsoft Windows Server, VMware, Linux |
Identifies and describes the server's front panel components, including SFF and LFF models.
Details the various components located on the server's system board.
Explains SAS/SATA drive components, NVMe SSD LEDs, and drive bay numbering schemes.
Describes different riser types and their PCIe slot configurations.
Covers procedures for powering up, powering down, and managing server power states.
Details how to extend, remove, and secure the server within a rack.
Provides steps for removing/installing access panels, fan cages, and air baffles.
Covers prerequisites and steps for initial server setup and installation.
Specifies environmental, space, airflow, and power requirements for server installation.
Discusses hot-plug power supply calculations and installation of redundant supplies.
Details HPE Smart Storage Battery and Hybrid Capacitor options for backup power.
Covers drive guidelines, supported carriers, and installation of SAS/SATA, NVMe, and uFF drives.
Explains installation procedures for primary, secondary, and tertiary riser cages.
Provides tables for SAS/SATA kit cabling part numbers and diagrams for connections.
Lists NVMe bay/riser kit cabling part numbers and diagrams for connections.
Shows specific cable routing configurations for various drive options and expanders.
Describes utilities like Active Health System, HPE iLO 5, Intelligent Provisioning, and UEFI utilities.
Explains methods for updating system ROM, firmware, and drivers using various tools.
Lists available documentation for resolving common server problems and error messages.
Provides instructions and warnings for replacing the server's real-time clock battery.
Links to warranty information for various HPE server and networking products.
Details markings and declarations related to regulatory compliance for specific regions.
Lists operating and non-operating temperature and humidity ranges for the server.
Provides physical dimensions and weight specifications for the server.
Details input and output specifications for various HPE server power supply models.
Provides contact information and website links for HPE support and documentation access.
Instructions for providing feedback to help improve the manual's content and quality.
