Installing airflow labels
When an Express Bay drive cage is installed, airflow labels might be required:
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
The components included with the hardware option kit
Procedure
• If an eight-bay SFF drive cage is installed in box 1, then airflow labels are not required.
• If a blank is installed in box 1, replace it with the blank that comes with the kit.
• If a Universal Media Bay is installed in box 1, do one of the following:
◦ If the 2SFF drive cage is not installed, then install airflow labels as shown.
94 Hardware options installation
To Next Page
Loading...
