To Next PageTo Next Page
Need help?Do you have a question about the HPE ProLiant DX380 Gen10 and is the answer not in the manual?
General| Processor | Intel Xeon Scalable Processors |
|---|---|
| Processor Sockets | 2 |
| Expansion Slots | Up to 8 PCIe 3.0 slots |
| Form Factor | 2U Rack |
| Management | HPE iLO 5 |
| Memory | Up to 3.0 TB with 24 DIMM slots |
| Storage | Up to 24 SFF or 16 LFF drives |
| RAID Support | Smart Array |
| Network | Embedded 1Gb Ethernet |
| Power Supply | HPE Flexible Slot Power Supplies |
| Operating System Support | Microsoft Windows Server, Red Hat Enterprise Linux (RHEL), SUSE Linux Enterprise Server (SLES), VMware vSphere |
Identifies front panel parts like drive bays, ports, and LEDs.
Details rear panel ports, power supplies, and riser slots.
Locates connectors, switches, and ports on the system board.
Explains SAS/SATA and NVMe drive indicators and functions.
Details riser cards and supported PCIe slot types.
Details the HPE Smart Array P824i-p MR Gen10 controller components.
Instructions for powering the server on, off, and standby.
Steps for extending and removing the server from a rack.
Guidance on securing and routing cables within the server chassis.
Procedures for accessing and removing internal server components.
Details available support packages and services for HPE systems.
Lists setup requirements and OS installation guidance.
Instructions for updating system firmware and drivers.
Procedures for installing power supplies and energy packs.
Instructions for installing SAS, SATA, NVMe, and uFF drives.
Steps for installing DIMMs, NVDIMMs, and Persistent Memory modules.
Procedures for installing storage controllers and riser cages.
Guides for installing various drive cages and expansion boards.
Steps for installing processors and heatsinks.
Instructions for installing and enabling the TPM module.
General rules for connecting storage devices and components.
Visual guides for connecting SAS/SATA and NVMe drives.
Overview of Active Health System, iLO, and related utilities.
Details on UEFI, STK, and security features.
Information on HPE SSA, MR Storage Administrator, and StorCLI.
Guidance on NMI functionality and troubleshooting resources.
Steps for replacing the system real-time clock battery.
Details on operating conditions and physical dimensions.
Technical details for various server power supply units.
