To Next PageTo Next Page
Need help?Do you have a question about the HPE ProLiant DL385 Gen10 Plus and is the answer not in the manual?
General| Processor Sockets | 2 |
|---|---|
| Memory Slots | 32 DIMM slots |
| Form Factor | 2U Rack |
| Management | HPE iLO 5 |
| Processor | AMD EPYC 7003 Series Processors |
| Memory | Up to 4TB |
| Storage | Up to 12 LFF drives |
| RAID Support | HPE Smart Array Controllers |
| Storage Controller | HPE Smart Array SR Gen10 Controllers |
| Expansion Slots | Up to 8 PCIe 4.0 slots |
| Power Supply | 1600W |
| Operating System Support | Windows Server, Red Hat, SUSE, VMware |
Details the status and functionality of front panel LEDs and buttons for SFF and LFF servers.
Explains drive bay numbering conventions for various controller and expander configurations.
Procedures for powering the server on and off, including forced shutdown methods.
Instructions for extending the server from the rack and securing cables.
Guides through the initial steps for setting up the server.
Guidelines, supported carriers, and installation of SAS, SATA, and NVMe drives.
Guidance on installing processors and their associated heatsinks.
Step-by-step guide for installing PCIe expansion cards into the server.
Introduction to HPE iLO 5 for remote server management.
