Secure cables using the cable management arm
For rack rail installation instructions, see the documentation that ships with the rack rails.
WARNING: To reduce the risk of electric shock, fire, or damage to the equipment:
• Do not insert wrong connectors into ports.
• Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
• Unplug the power cord from the power supply to disconnect power to the equipment.
• Do not route the power cord where it can be walked on or pinched by items placed against it. Pay particular
attention to the plug, electrical outlet, and the point where the cord extends from the server.
Procedure
1.
After the server is racked, connect any peripheral devices to the server.
To identify components, see Rear panel components.
2.
At the rear of the server, plug in the power cord to the power supply.
3. Install the power cord anchors.
Operations
35
To Next Page
Loading...
