To Next PageTo Next Page
Need help?Do you have a question about the HPE ProLiant DL385 and is the answer not in the manual?
General| Product Type | Server |
|---|---|
| Maximum Processors | 2 |
| Memory Type | DDR4 |
| Network | Gigabit Ethernet |
| Operating System Support | Windows Server, Linux |
| RAID Support | Yes |
Identifies and describes components on the server's front panel, including drives and ports.
Details the components located on the rear of the server, such as riser slots and ports.
Illustrates and describes components found on the server's system board, including connectors and switches.
Identifies front, rear, and midplane drive boxes and their numbering schemes.
Explains how drive bays are numbered based on controller connections and SAS expanders.
Covers components and LEDs for SAS/SATA and NVMe drives.
Procedures for powering the server on, off, and managing standby states.
Steps for extending, removing server from rack, and securing cables.
Procedures for removing access panels, fan cages, air baffles, and riser cages.
How to access the Systems Insight Display and the product's rear panel.
Lists necessary steps and downloads before configuring the server.
Details environmental, power, and grounding requirements for safe operation.
Important warnings and cautions regarding server handling, power, and safety.
Describes options available on the Power-On Self-Test (POST) screen for configuration.
Guide to the process of installing an operating system onto the server.
Covers general guidelines and supported carriers for installing server drives.
Information on power supply specifications and installation procedures.
Details various drive cage options and their installation procedures.
Information on fan configurations and installing high-performance fans.
Procedures for installing processors and heatsinks for thermal management.
Guidelines for installing and configuring server memory modules (DIMMs).
Information on supported storage controllers and their installation.
Instructions for installing riser cages and expansion boards.
Information on supported PCIe form factors and slot configurations.
Covers the installation and enabling of the TPM 2.0 module.
General guidelines for connecting internal and external server cables.
Visual guides showing how to route various internal cables for different configurations.
Details HPE's Integrated Lights-Out management processor and its features.
Overview of the server's embedded deployment and system setup tool.
Explains the system's embedded firmware utilities for configuration.
The tool for configuring RAID arrays and storage.
Guides on updating server firmware, BIOS, and drivers.
Lists available guides and resources for server troubleshooting.
Step-by-step instructions for replacing the system battery.
Links to warranty details for HPE servers and options.
Details operating temperature and humidity ranges for the server.
Provides physical dimensions and weight of the server.
Lists specifications for various power supply options.
