HPE ProLiant DL385 - DSC-25 2-Port SFP28 Card Ports and Leds

Item Description Status
4 Drive status LED • O—The drive is not configured by a RAID controller
• Solid green—The drive is a member of one or more logical
drives
• Flashing green (4 Hz)—The drive is operating normally and
has activity
• Flashing green (1 Hz)—The drive is rebuilding or
performing a RAID migration, stripe size migration, capacity
expansion, logical drive extension, or is erasing
• Flashing amber/green (1 Hz)—The drive is a member of one
or more logical drives that predicts the drive will fail
• Solid amber—The drive has failed
• Flashing amber (1 Hz)—The drive is not configured and
predicts the drive will fail
5
Adapter ejection release latch and
handle
Removes the SFF flash adapter when released
DSC-25 2-port SFP28 card ports and LEDs
Ports
Table 1: Ports
Item
Port Description
1 Management port 1GbE RJ45
2 Network interface port 10/25G SFP+ based
3 Network interface port 10/25G SFP+ based
LEDs
The HPE for Pensando DSP
DSC-252p SFP28 card is a dual-port, single-slot, half-height, half-length (HHHL) SFP28
network adapter. It has LEDs for Link (L) and Activity (A) for each port. A half-height bracket is shown in the following
illustration with SFP28 ports and LEDs.
Component identification
36