HPE ProLiant DL360 Gen10 User Manual

HPE ProLiant DL360 Gen10 Server User Guide
Part Number: 869840-401
Published: May 2020
Edition: 9
Abstract
This document is for the person who installs, administers, and troubleshoots servers and storage systems. Hewlett
Packard Enterprise assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards
in products with hazardous energy levels.

HPE ProLiant DL360 Gen10 Specifications

General

Form Factor	1U rack
Expansion Slots	Up to 3 PCIe 3.0 slots
Processor	Intel Xeon Scalable processors (up to 28 cores)
Memory	HPE DDR4 SmartMemory
Storage	Up to 10 SFF SAS/SATA/SSD or 4 LFF SAS/SATA
Networking	HPE FlexibleLOM
Power Supply	HPE 500W, 800W, 1600W, or 1600W 48VDC Flexible Slot Power Supplies
Management	HPE iLO 5
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi

Summary

Component Identification

Front Panel Components

Identifies and describes front panel ports, buttons, and LEDs on the server.

Rear Panel Components

Details the ports and connectors located on the rear of the server.

System Board Components

Processor, Heatsink, and Socket Components

Operations

Power Up the Server

Power Down the Server

Remove the Server from the Rack

Hardware Options Installation

Installing a Redundant Hot-plug Power Supply

Step-by-step guide for installing an additional hot-plug power supply.

Installing a DIMM

Instructions for installing Single In-line Memory Modules (DIMMs) into the server.

Installing an HPE Smart Array P408i-a SR Gen10 Controller Option

Guide for installing the HPE Smart Array P408i-a SR Gen10 Controller.

Installing an Accelerator or GPU in the Primary Riser Cage

Software and Configuration Utilities

HPE iLO 5

Details the HPE Integrated Lights-Out 5 management processor features and capabilities.

Intelligent Provisioning

Explains the server setup and OS deployment tool.

UEFI System Utilities

Troubleshooting

Troubleshooting Resources