HPE ProLiant DL385 Gen10 Plus

Power supply specifications
Depending on the installed options and the regional location where the server was purchased, the server can be
configured with one of the following power supplies:
• HPE 500W Flex Slot Platinum Hot-plug Low Halogen Power Supply
•
HPE 800W Flex Slot Platinum Hot-plug Low Halogen Power Supply
• HPE 800W Flex Slot Titanium Hot-plug Low Halogen Power Supply
• HPE 800W Flex Slot Universal Hot-plug Low Halogen Power Supply
• HPE 800W Flex Slot -48VDC Hot-plug Low Halogen Power Supply
•
HPE 1600W Flex Slot Platinum Hot-plug Low Halogen Power Supply
For detailed power supply specifications, see the QuickSpecs on the Hewlett Packard Enterprise website.
HPE 500W Flex Slot Platinum Hot-plug Low Halogen Power Supply
Specification Value
Input requirements
—
Rated input voltage
100 VAC to 240 VAC
240 VDC for China only
Rated input frequency
50 Hz to 60 Hz
Not applicable to 240 VDC
Rated input current
56 A at 100 VAC
27 A at 200 VAC
23 A at 240 VDC for China only
Maximum rated input power
557 W at 100 VAC
539 W at 200 VAC
537 W at 240 VDC for China only
BTUs per hour
1902 at 100 VAC
1840 at 200 VAC
1832 at 240 VDC for China only
Power supply output
—
Table Continued
Specifications 161