Need help?Do you have a question about the HPE ProLiant DL20 Gen10 Plus and is the answer not in the manual?
General| Form Factor | 1U rack |
|---|---|
| Chipset | Intel C256 |
| Memory Type | DDR4 ECC UDIMM |
| Memory Slots | 4 DIMM slots |
| Processor | Intel Xeon E-2300 series |
| Memory | Up to 128GB DDR4 |
| Storage | Up to 4 LFF or 4 SFF drives |
| Network | Embedded 1GbE |
| CPU Family | Intel Xeon E-2300, Intel Pentium, Intel Core i3 |
| Storage Controller | HPE Smart Array S100i |
| Maximum Internal Storage | Up to 32 TB |
| Remote Management | HPE iLO 5 |
| Operating System Support | Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware |
Identifies and describes front panel components, LEDs, and buttons, explaining their status and definitions.
Identifies and describes rear panel components and LEDs, detailing their status and definitions.
Identifies and describes the components on the server's system board.
Details drive bay numbering, drive LEDs, PCIe slots, and DIMM slot/label identification.
Details M.2 SSDs, NVMe boot devices, fan behavior, TPM, and BitLocker guidelines.
Procedures for removing the server from a rack and installing it into a rack.
Guides for removing and installing server components like bezels, panels, baffles, and risers.
Instructions for powering the server on and off using different methods.
Guides for initial system installation and server setup procedures.
Covers operational, environmental, power, grounding, rack, server, and ESD requirements and precautions.
Guides for installing various drives, optical drives, storage controllers, and energy packs.
Instructions for installing memory modules, PCIe risers, and expansion cards.
Details installation of M.2 SSDs, NVMe boot devices, intrusion switches, serial ports, and internal USB.
General guidelines for cabling and techniques for managing internal cables.
Details cabling for various drive configurations and power supplies.
Covers cabling for energy packs, storage backup, optical drives, M.2 SSDs, fans, intrusion switches, and serial ports.
Guides for OS installation and initial server setup using various methods.
Covers controller configuration, network controllers, server monitoring, and software/firmware updates.
Explains Non-Maskable Interrupt (NMI) for system crash dump generation.
Lists available resources for troubleshooting server problems.
Provides battery information, safety warnings, and step-by-step replacement procedures.
Information regarding regulatory compliance and chemical substance declarations.
Links to warranty information for HPE products.
Details operating environment requirements like temperature, humidity, and altitude.
Provides the physical dimensions and weight specifications of the server.
Lists the technical specifications for the various server power supplies.
How to contact HPE for live assistance, access services, and download software/firmware updates.
Details HPE's Customer Self Repair program and remote support services.
How to provide feedback to improve HPE documentation quality.
To Next Page