a. Connect each power cord to the server.
b. Connect each power cord to the power source.
16. Power up the server .
17. If removed, install the front bezel .
The installation is complete.
The System Intrusion Detection setting in the UEFI System Utilities is automatically enabled after installing the chassis intrusion
detection switch. To view a log of intrusion events, use the iLO web interface to access the IML or the iLO event log. For more
information, see the iLO user guide on the Hewlett Packard Enterprise website (https://www.hpe.com/support/ilo-docshttps://www.hpe.com/support/ilo-docs).
To Next Page
Loading...
