To Next PageTo Next Page
Need help?Do you have a question about the HPE ProLiant DL560 Gen10 and is the answer not in the manual?
General| Expansion Slots | Up to 8 PCIe 3.0 slots |
|---|---|
| Form Factor | 2U rack |
| Remote Management | HPE iLO 5 |
| Processor | Intel Xeon Scalable Processors |
| Memory | Up to 6TB DDR4 (48 DIMM slots) |
| Network Controller | HPE FlexibleLOM, optional stand-up cards |
| Power Supply | 1600W |
| Storage | Supports up to 24 SFF SAS/SATA drives or 12 NVMe drives |
Identifies and describes components located on the front panel of the server.
Identifies and describes components located on the rear panel of the server.
Specifies space, airflow, temperature, and power requirements for server installation.
Provides critical safety warnings and cautions for server handling and operation.
Details safety warnings related to rack installation and stability.
Explains precautions to prevent damage from electrostatic discharge.
Information on installing and supported operating systems for the server.
Instructions for powering the server on and off.
Guides for extending, removing, and securing the server in a rack.
Instructions for installing various drive cages (HDD, NVMe).
Steps for identifying, installing, and upgrading server processors.
Guidance on installing DIMMs, NVDIMMs, and HPE Persistent Memory modules.
Information on installing and configuring server power supplies for redundancy.
Instructions for installing and enabling the HPE TPM 2.0 Gen10 Kit.
Details on remote server management using HPE Integrated Lights-Out 5.
Overview of the server setup and deployment tool.
Information on available documents for troubleshooting server issues.
