HPE ProLiant DL560 Gen10 - Power Supply Leds

Item Description Status
1 Activity LED Off = No network activity
Solid green = Link to network
Flashing green = Network activity
2 Link LED Off = No network link
Green = Network link
3 UID LED Solid blue = Activated
Flashing blue:
• 1 Hz/cycle per sec = Remote
management or firmware upgrade
in progress
• 4 Hz/cycle per sec = iLO manual
reboot sequence initiated
• 8 Hz/cycle per sec = iLO manual
reboot sequence in progress
• 1 fast flash and then off for 3
seconds = iLO Service Port status
is Complete
• 4 medium flashes and then off for 1
second = iLO Service Port status is
Busy
• 8 fast flashes and then off for 1
second = iLO Service Port status is
Error
Off = Deactivated
Power supply LEDs
The power supply LED is located on each power supply.
Component identification 21