• If only one hard drive is used, install it in the bay with the lowest device number.
• Install drives of the same capacity to provide the greatest storage space efficiency when drives are
grouped into the same drive array.
Rear panel components
Rear panel with optional tertiary riser
Item Description
1 Primary PCIe riser slots 1-3
2 Secondary PCIe riser slot bays 4-6 (Optional)
3 Tertiary PCIe riser slots 7-8 (Optional)
4 Power supply 2 (PS2)
5 Power supply 1 (PS1)
6 Serial port
7 iLO Management Port
8 Video port
9 Rear USB 2.0 ports (2)
10 Rear USB 3.0 ports (2)
11 FlexibleLOM (optional)
Rear panel with optional redundant power supplies
Component identification 19
To Next Page
Loading...
