HPE ProLiant DL560 Gen10 - System Maintenance Switch Descriptions

Item Description
11 Fan connectors (6)
12 Front power switch connector
13 Reserved (6)
14 Drive backplane power connectors (3)
15
Energy pack connector 1 (system board and controllers)
1
16 Optional 2SFF HDD x1 SATA board sideband connector
17
Energy pack connector 2 (processor mezzanine board)
2
18 Intrusion detection switch connector
19 Universal media bay USB/Display port connector
20 Optional power supply connectors (PS3, PS4)
21 Standard power supply connectors (PS1, PS2)
22 Flexible Smart Array connector
23 Secondary PCIe riser connector (processor 2 required)
24 System battery
25 Tertiary PCIe riser connector (processor 2 required)
26 TPM connector
27 microSD card slot
28 Reserved (2)
1
This connector can be used for the HPE Smart Storage Battery or the HPE Smart Storage Hybrid Capacitor. The energy
pack connected to this connector provides backup power to the DIMM slots and controllers installed on the system board.
2
This connector can only be used with the HPE Smart Storage Battery. The energy pack connected to this connector
provides backup power to the DIMM slots on the processor mezzanine tray.
System maintenance switch descriptions
Position Default Function
S1
1
Off
Off = iLO security is enabled.
On = iLO security is disabled.
S2 Off Reserved
S3 Off Reserved
S4 Off Reserved
S5
1
Off
Off = Power-on password is enabled.
On = Power-on password is disabled.
Table Continued
24 Component identification