Energy pack cabling
Cable Description
Processor mezzanine tray energy pack cable
1
Blue
System board energy pack cable
2
Orange
1
This energy pack provides backup power to the components on the processor mezzanine tray. The energy pack used
must be an HPE Smart Storage Battery.
2
This energy pack provides backup power to the DIMM slots and controllers installed on the system board. The energy
pack used can be either the HPE Smart Storage Battery or the HPE Smart Storage Hybrid Capacitor.
HPE Smart Array MR Gen10 Controller cabling
From the drive cage backplane to the controller in the primary PCIe riser cage
From the drive cage backplane to the controller in the secondary PCIe riser cage
Cabling 181
To Next Page
Loading...
