To Next PageTo Next Page
Need help?Do you have a question about the HPE ProLiant DL560 Gen9 and is the answer not in the manual?
General| Memory | Up to 3TB |
|---|---|
| Storage | Up to 24 SFF SAS/SATA drives |
| Network | 4 x 1GbE |
| Power Supply | Up to four hot-plug redundant power supplies |
| Form Factor | 2U Rack |
| Remote Management | HPE iLO (Integrated Lights-Out) |
Lists physical parts of the server, including fans, baffles, and drive cages.
Lists major internal server components such as processors, power supplies, and DIMMs.
Details the various CPU models supported by the server, including their specifications.
Lists necessary tools for servicing and general safety guidelines, including ESD prevention.
Steps to prepare the server before component service, such as powering down and extending from rack.
Procedures for extending the server from the rack and securing it.
Instructions for removing specific components like access panels, air baffles, and mezzanine trays.
Lists available troubleshooting guides and external resources for issue resolution.
Introduction to system diagnostic utilities like HPE iLO and Active Health System.
Details on configuration and management utilities accessed via UEFI.
Details of front panel parts, connectors, and status indicator lights.
Explains LED behaviors for power faults and overall system status.
Identifies rear panel ports and defines PCIe riser board slot configurations.
Identifies various connectors and components located on the server's main system board.
Details operating conditions, temperature ranges, and physical dimensions of the server.
Details on server power supply units, including input and output characteristics.
