To Next PageTo Next Page
Need help?Do you have a question about the HPE ProLiant DL580 Gen9 and is the answer not in the manual?
General| Product Type | Server |
|---|---|
| Form Factor | 4U Rack |
| Memory Slots | 96 DIMM slots |
| Processor | Up to 4 Intel Xeon E7-4800/8800 v3/v4 series |
| Memory | Up to 6 TB with 96 x 64 GB DDR4 |
| Storage Controller | HPE Smart Array P830i/2G |
| Expansion Slots | 9 PCIe 3.0 slots |
| Power Supply | Up to 4 x 1500W hot-plug, redundant power supplies |
| Network | 4 x 1GbE embedded |
| Remote Management | HPE iLO 4 |
| Operating System Support | Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware |
Lists required tools and crucial safety precautions, including ESD prevention, before performing procedures.
Covers powering down, extending the server from the rack, and complete removal.
Procedures for removing the access panel, rack bezel, and server fans.
Guides for replacing drives, power supplies, expansion boards, and backplanes.
Steps for replacing memory cartridges, DIMMs, heatsinks, I/O boards, and SPI boards.
Links to guides for resolving common problems and interpreting error messages.
Explains UEFI System Utilities, boot controls, and embedded diagnostic options.
Details Insight Diagnostics and Active Health System for monitoring server health.
Identifies front panel connectors, buttons, and status LEDs.
Illustrates rear panel components, power supplies, and I/O board layout.
Explains maintenance switches, NMI jumpers, DIMM slots, and processor sockets.
Details DIMM, drive, FBWC module LEDs, and identification buttons.
Covers NVMe SSD components, fan locations, and USB support.
Lists operating conditions, dimensions, and weight of the server.
Details electrical and output specifications for server power supply units.
Lists common acronyms and their definitions used in the document.
