To Next PageTo Next Page
Need help?Do you have a question about the HPE ProLiant XL270d Gen9 and is the answer not in the manual?
General| Processor Sockets | 2 |
|---|---|
| Memory Slots | 24 DIMM slots |
| Form Factor | 2U |
| Processor | Intel Xeon E5-2600 v3 and v4 series |
| Memory | DDR4 |
| Storage | Up to 8 SFF or 4 LFF drives |
| Network | Multiple 1GbE ports |
| Network Controller | FlexibleLOM |
| GPU Support | Yes |
Details various components found on the server's system board, including connectors and slots.
Identifies components of the PCI riser modules, including connectors and boards.
Describes the procedures for powering the server on using different methods.
Details the steps for safely powering down the server, including cautions.
Provides instructions on how to safely remove the server from its chassis.
Outlines the procedure for installing the server back into the chassis.
Explains how to remove the server's top access panel for internal access.
Describes the process of reinstalling the server's access panel.
Details the steps to remove the side panel for component access.
Provides instructions for reinstalling the server's side panel.
Outlines the steps to remove the server's drive cage assembly.
Provides critical safety warnings and cautions for handling the server.
Details on installing SATA devices and considerations for SAS drive installation.
Critical warnings and cautions for installing processors and heatsinks.
Detailed procedure for installing a server processor and its associated heatsink.
Lists technical specifications for various RDIMM and LRDIMM types.
Explains the default Advanced ECC memory protection mode and its error correction capabilities.
Describes how online spare memory protects against failing DIMMs.
Step-by-step instructions for installing 4:1 PCI riser modules.
Procedure for installing the HPE Smart Array P542D storage controller module.
Configuration for optimal communication between GPU and server processor.
Configuration for optimal GPU-to-GPU communication.
Configuration for optimal GPU-to-GPU communication.
Procedure for installing an expansion board into a compatible slot.
Procedure for installing a dedicated iLO management port card.
Step-by-step procedure to install the Trusted Platform Module board.
Procedure to enable the TPM and BIOS secure startup via System Utilities.
Describes iLO as a remote server management processor for monitoring and control.
Monitors and logs server hardware and system configuration changes.
Details RESTful API for server configuration, inventory, and monitoring via iLO.
Recommends registering for remote support to enhance warranty and service delivery.
A single-server deployment tool for simplifying ProLiant server setup.
Embedded ROM utilities for system configuration activities.
Tool for configuring and managing HPE Smart Array controllers.
Feature that restarts the system after a catastrophic OS error.
Utility to upgrade system firmware (BIOS).
Step-by-step procedure to remove the system battery.
Lists guides for resolving common problems and error messages.
Precautions to prevent system damage from static electricity discharge.
Methods for proper grounding when handling sensitive components.
